Home / Engines / 2.0T

2.0T TFSI · EA888 Gen 1–2

Audi 2.0T engine replacement & timing chain

The 2.0T in the Q5, A4, allroad and A5 has two well-known problems: it burns oil, and the timing chain stretches until it jumps. Both end the same way if you wait. Here is how to tell where your engine is and what can be done about it.

Symptoms

What the car is telling you

One of these alone is a reason to check. Two together usually mean the engine is already on the clock.

  • The oil light comes on between changesYou add a quart, then another, and the gap between top-ups keeps getting shorter.
  • Rattle for a few seconds on a cold startA metallic rattle from the back of the engine that fades as oil pressure builds. That is the chain.
  • Check-engine light with a cam/crank correlation codeP0016 and its relatives mean the chain has stretched far enough for the computer to notice.
  • Misfires and oil-fouled spark plugsOil getting past the rings burns in the cylinders and fouls the spark plugs.
  • It cranks but will not startAfter a rattle or a sudden stall, this usually means the chain has jumped. Do not keep cranking it.

Why it happens

Two separate faults, one engine

Oil consumption: pistons and rings

On these engines the original pistons and oil-control rings let oil past into the combustion chamber. Thicker oil or an additive does not change that. The real fix is inside the engine: updated pistons and rings, or a replacement engine.

Timing chain: stretch and the tensioner

The chain stretches with miles, and the tensioner can stop holding it tight. With enough slack the chain skips teeth. This is an interference engine, so when timing jumps the valves can hit the pistons, and a chain job becomes an engine job.

Why it’s your bill now

These problems led to class-action settlements and extended warranty coverage from Audi. That coverage had time and mileage limits, and for these model years it has run out.

EA888 1.8 / 2.0 timing chain replacement

Your options

Three ways to fix it

Which one fits depends on what the engine looks like inside. I’ll tell you what I’d do if it were my car.

  • Most common

    Engine replacement

    The old engine comes out, a replacement goes in, and everything that’s only reachable with the engine out gets dealt with at the same time. Engine and install in one shop.

    Makes sense when
    The engine burns oil heavily, has jumped timing with damage, or has too many miles to justify opening it up.
  • Keep your block

    Rebuild

    Your own engine is taken apart and goes back together with updated pistons and rings, a new timing set and whatever else it needs.

    Makes sense when
    The block and head are healthy and you want the oil consumption fixed at the cause.
  • Catch it early

    Timing chain service

    New chains, guides and an updated tensioner before the chain jumps. The smallest job of the three.

    Makes sense when
    The engine doesn’t burn oil, and the chain is stretched or rattling but has not skipped yet.

By model

Q5, A4, allroad, A5

Audi Q5 2.0T engine replacement

2011–2017

The Q5 is the best-selling Audi in the US, so this is the 2.0T I expect to see most. It’s a family car that gets driven every day, which is exactly how a slow oil problem goes unnoticed until the light comes on.

Audi A4 & allroad 2.0T engine replacement

2009–2016 (B8 / B8.5)

Same engine family, sedan and wagon. The earliest B8 cars are the ones that built this engine’s reputation for oil consumption.

Audi A5 2.0T engine replacement

2010–2017 (coupe and cabriolet)

Mechanically close to the A4, in a car people tend to keep because they like it. Worth fixing properly once.

How a job is quoted

Estimate first, then the work

  • Every car is quoted on its own

    No price list. Send the details through the form and you get an estimate for your car.

  • Nothing starts without your OK

    Work begins only after you approve the estimate. Timing is confirmed for each job.

  • Done right

    Assembled correctly, in the right order, every bolt torqued to spec. How I work

FAQ

Questions owners ask

How much oil consumption is too much on a 2.0T?

If you’re topping up between every oil change and the gaps keep getting shorter, it is not going to settle down.

Can I just replace the timing chain?

Yes, if the chain has not jumped yet and the engine is not burning oil. That is the best-case version of this problem. If the engine also uses oil, a new chain fixes only half of it.

The chain jumped and the engine won’t start. Is the engine done?

Not always, but assume there is valve damage until the engine is opened up. Do not keep cranking it. Once I see the inside, the choice between repairing the head, rebuilding or replacing the engine gets clear.

Isn’t this covered by Audi’s extended warranty or the class-action settlement?

That coverage had time and mileage limits, and for these model years it has expired. A dealer can check your VIN to confirm, and it costs nothing to ask.

How much does a 2.0T engine replacement cost?

Every engine and every car is different, so I don’t publish a price list. Send the year, model, engine and what’s going on through the form, and you get an estimate for your car before any work starts.

How long will my car be in the shop?

It depends on the car, what the engine looks like inside and how fast parts arrive. You get the timing together with the estimate.

I’m not in Wisconsin. Can I send the car to you?

Yes. Most of the upper Midwest, including the Chicago suburbs, is within about 500 miles of Appleton, and a non-running car travels fine on a carrier. How out-of-state projects work.

Think your 2.0T is on the clock?

Send me the year, model, mileage and what it’s doing.

Start a project